FAG - Replacement Ball Bearing for KTM/Husqvarna Engine - Type NJ205 C3

Depending on the part number you are replacing, you may need to remove a seal on one or both sides of the bearing as this unit is sealed on both sides.

Feature

• Bearing arrangements are subjected to very high radial loads
• Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position
• Bearing arrangements must have very high rigidity
• Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
• High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
• Semi-locating bearing function
• Increased capacity design
• X-life design
• Solid window cage made from glass fiber reinforced polyamide PA66
• C3 radial internal clearance
• 34500 N dynamic/27500 N static

Technical Specifications

• Cage Material : Polyamide
• Maximum Speed : 17200 rpm
• Series : NJ2-E
• Temperature Rating : -30 to 120 deg C
• Type : Separable
• Bore Diameter : 25 mm
• Outside Diameter : 52 mm
• Number of Rows : 1
• Width : 15 mm
• Load Capacity : 34500 N

Replaces KTM/Husqvarna Parts

• 49030023100
• 47030082000
• C90030023000